I/O performance is imperative in instrument control. The computer should always be waiting for the instrument and not the other way around. The TAMS 61488 can deliver all the speed that your instruments need.

By moving software functions into hardware and concentrating on improving the performance of small transactions the 61488 is able to offer real world performance improvements.

Using a single number to characterize performance of GPIB, or any type of I/O operation can be misleading. There are many factors that affect actual performance: the amount of data being transferred; the size of data blocks; the difference between read and write speeds; programming language; the computer being used; etc. As a result, we do not recommend basing any decisions on maximum transfer rate. However, to conform to the industry standard of specifying maximum I/O speed, the TAMS 61488 card can be specified to exceed 1MB/s. In addition, our tests have shown the 61488 to be 4.5 times than the 60488 for small transactions.

The TAMS 61488 is fully compliant with the PCI specifications for 3.3V and 5V PCI or PCI-X slots and delivers the highest possible level of throughput. The card operates with 32 bit or 64 bit signaling specified at 33, 66, 100 or 133MHz, allowing complete configuration flexibility. Whether you are using HTBasic for Windows or programming in C with the SICL or VISA library, your code will now run at full performance.

General Requirements

Minimum System Requirements: Windows XP, CI slot, & Agilent I/O Library E2094M or later

Supported Standards: PCI, PCI-X, IEEE-488.1 and IEEE-488.2, SICL, VISA

Supported Software Development: HTBasic for Windows or C

General Characteristics

Dimensions: 121 mm x 76 mm x 16mm including connectors (smaller than PCI half length card)

Weight: 125 grams

Maximum I/O speed: >1MB/s

PCI: 3.3 or 5v; 32 bit or 64 bit signaling; 33, 66, 100 or 133MHz; PCI or PCI-X

Power: +5V 500 mA (max), 390 mA (typical)

GPIB Loads: 1 or 11, user selectable

Connector: ITT Cannon 25 position MDSM Microminiature Connector

Cable: TAMS 488 (see below)

Warranty: 1 Year

Environmental Specifications

Operating Environment: 0 degrees C to +40 degrees C

Storage Environment: -20 degrees C to +60 degrees C

Humidity: 20-80% (0 degrees C to +40 degrees C)

Storage Humidity: 20-80% (0 degrees C to +55 degrees C)

Documentation

Operation Manual & Drivers: 61488 Support